24-Hour Emergency Water Leak Detection in Atlanta
24-Hour Emergency Water Leak Detection in Atlanta
15-25 Minute Response Time
A leaky or dripping faucet is one of the common plumbing problems that homeowners experience. While a leaky faucet may seem like a minor issue, it can result in costly problems if not addressed in a timely manner. Ignoring a leaky faucet can not only put a significant dent in your wallet when it comes to water bills, but it will also encourage mold growth in your home. If you have a leaking faucet, it’s advisable to have it fixed as soon as possible to avoid high water bills and property damage.
In this article, we will look at the causes of a leaky faucet and how to fix the problem.
The following are the common causes of leaky faucets:
Step 1: Turn Off The Water
The first thing to do when you have a leaky faucet is to shut off the water at the shutoff valves under the sink or at the main water supply.
Step 2: Disassemble The Faucet
The way to disassemble the faucet depends on the type of fixture. First, remove the handles by unscrewing the screws that attach the handle onto the stem and then detach the valve stem. If you are having trouble disassembling the faucet, refer to the faucet manual.
Step 3: Inspect All The Parts
Once you’ve dissembled the faucet, inspect the cartridge, O-ring, valve seat, rubber washers, and seals for obvious wear and tear. You should replace all the parts that are not in top condition.
Step 4: Replace The Damaged Parts
As we’ve already highlighted, your faucet could be leaking as a result of a damaged cartridge, a malfunctioning O-ring, or a deteriorated valve seat. If any parts of the faucet are worn out, you’ll need to have them replaced to restore your faucet to its good working order. You can find these parts in local hardware stores.
You should only replace damaged parts of a leaking faucet if you know what you're doing. If you're not a knowledgeable and experienced plumber, you could make mistakes that could worsen the situation.
Step 5: Reassemble The Faucet
Once you have the replacement parts you need and have cleaned all the components of the faucet, put the fixture back together and test it for leaks. If you're having trouble reassembling the faucet, refer to your faucet manual.
So there you have it. This is the simple process of fixing a leaky faucet. However, it’s a process that should be handled with care and precision. You must also have the right tools and equipment to get the job done right. If you need help with faucet leak repair, get in touch with a reliable leak detection company.
Need Prompt and Reliable Leak Detection Service? Get in Touch Leak Detection of Atlanta
If you’re looking for a dependable water leak detection company, Leak Detection of Atlanta has got you covered. You can always count on us when it comes to leak detection and faucet leak repair.
Busy lifestyles and the need for convenience have made the dishwasher to become a necessary household…
Hose-fed appliances can malfunction without warning and without your knowledge. Leaks from these appliances…
What to Do When a Fire Starts in Your Home Experiencing a fire in your home can be frightening. According to the National Fire Protection…
How to Prepare for Winter Storms Winter brings with it a tranquil coating of snow, but it also carries with it the possibility of unforeseen…